Direct Driven Screw Air Compressor 315 KW:
Configuration characteristics
1. A precisely-made central bracket is used to keep the motor
aligned permanently with the air end.
2. A highly resilient coupling is adopted to make the compressor
operate smoothly, and the elastomeric is long in useful life.
3. The discharge pipe is double-wall corrugated pipe, and the oil
way uses a special high-pressure hose which is resistant to
temperature up to 125℃.
4. For the extremely high temperature conditions in some districts,
the large-area plate heat exchanger and high- efficiency water
chiller are used.
High quality shaft coupling elastic body can buffer and compensate
for the imbalanced moment of operation. The elastomeric is designed
into an in volute cambered surface, which effectively avoids stress
concentration and improve the buffering effect of the elastomeric
to increase its bearing capacity. In addition, the high quality
materials ensure excellent durability for the elastomeric and can
better absorb the vibration arising from the rotation to remove
noise.
Reliability
Since no wearing parts are used for the double-screw air end, it
can operate for up to 40,000-80,000 hours between failures if well
maintained.
SpecificationsModel | | DA-420GA/W |
Capacity | m3/min | 54.0 | 47.0 | 39.0 | 33.5 |
Working pressure | Mpa | 0.7 | 0.8 | 1.0 | 1.3 |
Motor power | KW | 315 |
HP | 420 |
Noise | dB(A) | 72±5, measured according to the international GB/T4980-2003
standard |
Outlet Diameter | mm | DN125 |
Cooling method | | A-Air cooling W-Water cooling |
Driven method | | Direct driven |
Oil content of discharged air | ppm | Less than 3 ppm |
Motor | Pressure | Mpa | 0.1033 |
Rotation speed | rpm | 2980 |
Starting method | | Y- start |
Protection class | | IP54 |
Insulation class | | F class |
Voltage | V/Ph/Hz | 380V/3Ph/50Hz as standard also can be changed according to
customer’s requirements. |
Dimension (mm) | L | 4600 |
W | 2300 |
H | 2400 |
Weight | Kg | 5200 |
compressor--screw compressor--air compressor